Amana washers come feature-rich and are known to wash the laundry spotlessly. However, they are also prone to malfunctions, and one common misbehavior is an Amana washer not spinning clothes dry, and you’ve to wonder why.
Your Amana washer fails to spin clothes dry due to a power issue, wrong setting, washer overload, load imbalance, an open door, excess suds, a drainage issue, a defective drive belt, or a program crash.
Whatever the cause, the better part is that it’s fixable, and you can do it yourself. This guide will discuss all nine issues in a simplified and satisfactory manner. Ultimately, you’ll be able to figure out what causes your Amana washer not to spin clothes dry and fix it promptly.
Let’s jump in!
Are you in a rush? Below is a table summary with the nine issues robbing your Amana washer of the joy of spinning clothes dry and their possible fixes.
Amana Washer Not Spinning Clothes Dry – Quick Troubleshooting Guide
| – | Likely Cause | Applicable Fix |
| 1. | Power Issue | In case of a power blackout, please wait for power to be back and restart the cycle. If you use an extension cord, drop it and connect the washer cable to the wall outlet |
| 2. | Wrong Setting Selection | Ensure you match your laundry with the proper wash cycle and spin speed |
| 3. | Washer Overload | Fill your Amana washer to the mark or ¾ full |
| 4. | Load Imbalance | Redistribute your laundry and use a sprint level to adjust the washer legs until they touch the ground |
| 5. | Open Door | Close the door tightly. If the lid/door switch is defective, replace it |
| 6. | Excessive Suds | Ensure you use only HE detergent and in the right amount |
| 7. | Drainage Problem | Unclog the filter, hose, and pump if clogged. Use a sump pump to get rid of the excessive water in case of an extended hose |
| 8. | Faulty Drive Belt | Replace the drive belt in case of physical damage or overly stretched |
| 9. | Program Crash | Reset your Amana washer |
Why is My Amana Washing Machine Not Spin Drying Clothes?
Below are some of the reasons why your Amana washer is not spinning clothes dry and the fixes to attempt:
1. Power Issues
When there is a power failure, alteration, or even power reduction, your washer fails to reach the spin speed necessary to spin dry the clothes.
If that’s not it, do you use an extension? That could be why your washer isn’t spinning and drying the clothes. Extension cords don’t transmit enough power to spin-dry the clothes, and the spin cycle may also end prematurely.
Possible Fix
Start by checking out if there’s power in your home. You can switch on the light, and if it fails to light up, there’s no doubt you are having a power blackout. In the case of an extension cord, now that you know better, it’s time to drop it and ensure you directly connect your washer power cord to the wall outlet.
2. Wrong Setting Selection
Maybe you don’t know this, but some settings have low spin speed, and some have no spin speed. I am talking about the Delicate and the Hand Wash settings.
If you choose these settings, especially when washing bedding, sheets, or other bulky items, you will likely have dripping clothes after the cycle ends.
The rule of thumb says you should select each wash spin speed according to the laundry size and weight. For example, when washing bulky and heavy items, you should choose the Bulky/Bedding settings to ensure the clothes come out as they should.
Now you are wondering, what if no such settings exist on my Amana washer? I got you, dear friend! Run a second Drain and Spin cycle to ensure the washer removes the excess water in the laundry.
Possible Fix
Always strive to choose the Amana washer cycle according to your laundry size and weight. To help you, choose a high spin when washing heavy items and a slower one when washing lighter clothing.
3. Washer Overload
At times, you could be the cause of why you are getting soaking wet laundry after a spin cycle ends. Yes, you! This is because we are all tempted to wash everything in the laundry basket and forget that the washer has a specified capacity.
Well, when you overload your washer, you leave no space for the spinning to take place. Your washer may struggle to spin, which could be why you have extra wet laundry.
Possible Fix
Check your manufacturer specifications on load capacity on your manual. If your manual is nowhere near, ensure you fill the washer to the mark or ¾ full. The ¼ space you leave allows your clothes to turn seamlessly and will help eliminate the excess water in your clothes.
4. Load Imbalance
Was your washer installation appropriately done? Maybe you have never thought of it. Well, it’s time to check if all the legs are touching the ground.
If the washer is out of balance, your washer will struggle to spin the clothes dry. If the washer is unbalanced, the load will turn out of balance when you start the spin cycle. This means the heavy side will make it hard for the washer to spin clothes dry.
But still, it could happen, too, if you are washing a small load. The danger of this is that your washer’s internal components may break due to the excessive force your washer is imposing to try and spin the clothes dry. So, be on the watch!
Possible Fix
Start by checking if your washer feet are touching the ground. If not, use a sprint level to adjust them and ensure they touch the floor.
If the legs are okay, open the washer and ensure you redistribute the laundry. If the laundry is too small, add a sheet or so and ensure your laundry is at 3 ⁄ 4 capacity.
5. Open Door or Lid
We talk of a washer door when referring to the Amana front loader and a washer lid when talking about the Amana top loader. Whatever type of Amana washer you have, one thing is true: your washer won’t spin clothes dry when the door/lid is open.
Your Amana washer has a switch that detects when the lid/door is open. Maybe your washer started after pressing the start button, but you now find your clothes soaking wet.
If that’s not it, it could also be that the switch has detected an unlatched door, and that’s why it has stopped the spin cycle.
Possible Fix
Ensure you give a slam to the door/lid. Also, dig deeper into the door/lid switch and use a multimeter to test its continuity. If defective, replace it.
6. Excessive Suds
Every wash needs power, water, and detergent. Detergent is necessary for soaking, loosening, and brightening your laundry. However, suitable detergent is vital to a good wash and spin cycle.
When you use the wrong detergent (non-HE), it forms excess suds, which sends false information about a full washer. Also, excess suds make your laundry retain excessive moisture and could be why you are getting soaking wet clothes after a spin cycle.
Possible Fix
Always strive to use the suitable detergent (HE) and in the proper amounts.
7. Drainage Problem
Another common reason why your Amana washer does not spin-dry your laundry could be due to a drainage problem. Your washer should spin and drain simultaneously. However, if there’s an issue in the drainage system, you may get soaking-wet laundry.
Below are the issues to check:
- Clogged filter – A clogged filter won’t allow wastewater to pass through. The filter may clog with prolonged usage due to lint buildup or dirt. When the filter is clogged, it restricts wastewater from flowing through it, causing backups, which soaks your laundry.
- Extended drain hose – The drain hose should be at least 8 feet long. If it’s longer than this, it won’t drain the wastewater effectively or may also cause backup, which eventually makes your laundry wet.
- Clogged hose – It could be that the hose height is okay, but the issue could be that the hose is heavily clogged. This disallows water to flow efficiently, and if water won’t all drain, it soaks your laundry.
- Damaged drain pump – If you’ve checked the filter and the hose, and they seem okay, plus the hose height is 8 feet long and correctly installed, it’s time to look deeper into the drain pump. A damaged pump won’t allow an efficient flow of water, which makes your laundry wet.
Possible Fix
Remove a clogged filter and clean it with running tap water. Unclog the drain hose using a drain snake and also the pump.
If the hose height exceeds 8 feet, call a technician to install the drain hose on your behalf.
8. Defective Drive Belt
If all the above doesn’t work on your washer, then it’s time to look for a defective component, and in this case, the drive belt. This belt connects the drum to the motor and helps in the spinning cycle.
Since it’s rubber, it’s prone to wear naturally, and when this happens, it reduces the spin speed, which could be why your laundry is dripping wet.
Possible Fix
Replace the drive belt if it’s overly stretched or damaged.
9. Program Crash
If you are yet to find the issue, there could be a program crash. Don’t worry, however. This is common if your washer has stopped mid-cycle and there was a recent power surge or interruption when your washer was on.
Possible Fix
Just reset your Amana washer. Plug it out for 5 minutes.
Amana Front Load Washer Not Spinning Clothes Dry
The reason behind your Amana washer not spinning clothes dry includes a washer overload, unlatched door, power issue, load imbalance, or wrong setting.
If neither points to a wrong detergent usage that causes excessive suds, an issue in the drainage system, a faulty drive belt, or a program crash.
Closing Thoughts On an Amana Washer Not Spinning Clothes Dry
Above are why your Amana washer won’t spin dry your laundry. It could be due to an overload, wrong setting, load imbalance, drainage issue, wrong detergent, power issue, open door/lid, faulty drive belt, or a program crash.
With the guide, you can determine and troubleshoot each issue on your own, and thus no need to call an expert.
Also Read: