The Bosch Silence Plus 44 DBA is arguably one of Bosch’s most reliable dishwashers. But even so, this dishwasher can sometimes fail, and you’ll need an easy-to-follow Bosch Silence Plus 44 DBA troubleshooting guide to fix it.
Typical Bosch Silence Plus 44 DBA problems you can troubleshoot are a non-starting, non-cleaning, non-drying, or non-draining dishwasher, an option that stops mid-cycle, and non-working dishwasher buttons or display.
As you’ll realize, most of these issues don’t require much expertise. Of course, a few may call for an expert’s intervention – but that is after you try the troubleshooting DY first.
This guide will walk you through the seven issues, indicating their probable causes and applicable fixes. And if you are successful, you’ll save a lot of time and money, and even better, you’ll know what to check the next time your Bosch Silence Plus 44 DBA fails.
Let’s dive in!
In a hurry? See the quick troubleshooting tips for the 8 Bosch Silence Plus 44 DBA problems below:
Quick Bosch Silence Plus 44 DBA Troubleshooting Guide
| – | Dishwasher Problem | Likely Cause | Recommended Fix |
| 1. | The Dishwasher Won’t Start | Failed power supply, inadequate water, electronic glitch, wrong setting, unlatched door, or defective control board | Ensure the dishwasher has power and water, reset it to fix a glitch, and turn off Control Lock or Delay Start if active. Latch the door firmly and replace a defective control board |
| 2. | Dirty Dishes | Filthy interior, dish overload, or wrong cycle | Clean the dishwasher, especially the filter, load the dishes properly, and choose the correct cycle |
| 3. | Wet Dishes | Non-drying setting, disrupted cycle, insufficient Rinse Aid, poor dish loading, or wrong cleaning product | Choose a drying setting and allow the cycle to complete. Refill the Rinse Aid, load the dishes properly, and use the recommended cleaning product |
| 4. | The Dishwasher Won’t Drain | A clogged filter, drain pump, air gap or garbage disposal, or a blocked drain hose | Clean the filter, drain pup, air gap, and garbage disposal, and unkink/straighten out a pinched/kinked drain hose |
| 5. | Dishwasher Stops Mid-Cycle | Improperly latched door or a power or water disruption | Properly shut the door and check the power and water supply |
| 6. | Non-Working Buttons | Lack of power, Control Lock, obstructed or defective button, or failed control board | Ensure the dishwasher has power, disable Control Lock, clean the unobstructed button, and replace the button or control board if faulty |
| 7. | Non-Working Display | Lack of power, Control Lock, unlatched door, or dead main control board | Ensure the dishwasher turns on, disable Control Lock, properly latch the door, and replace the control board as your last option |
7 Common Bosch Silence Plus 44 DBA Problems for Troubleshooting
Shared below are seven problems your Bosch Silence Plus 44 DBA may suffer, which you can troubleshoot:
1. Bosch Silence Plus 44 DBA Not Starting
The Bosch Silence Plus 44 DBA may fail to start due to the lack of power or non-power-related issues. Let’s look at the two cases:
Bosch Silence Plus 44 DBA Won’t Turn On – No Power
If your Bosch Silence Plus 44 DBA won’t turn on, it’s likely because of a failed power supply. That brings us to these issues:
- Power outage
- Failure to press the wall switch
- Loose plugging
- Tripped breaker
- Blown-up fuse
- Defective outlet
- Damaged power cord
Fix
Your Bosch dishwasher should power on, which means checking for power (ruling out an outage). Then ensure the dishwasher is plugged firmly into the wall socket and turned on.
If it still doesn’t turn on, check if the circuit breaker is tripped up and reset it. And if the breaker is okay, use a multimeter to check the fuse, outlet, and power cord for continuity. Replace any of the three that lack continuity.
Bosch Silence Plus 44 DBA Won’t Start – Has Power
Now, if your Bosch Silence Plus 44 DBA has power but won’t start, you have to check for non-power related issues such as:
- Inadequate water – If the dishwasher doesn’t receive adequate water, it won’t start. In that case, check if the water supply valve is off, the water supply tube is disconnected or kinked, or the water inlet valve is faulty.
- Electronic glitch – Like other electronics, your Bosch dishwasher may suffer an electronic glitch that may stop it from starting. If so, all it takes is a quick reset.
- Wrong setting – Your Bosch dishwasher will fail to start if the setting is incorrect. In particular, the Control Lock will stop it from beginning until it’s off, while the Delay Start will postpone its starting time to later.
- Unlatched door – If the dishwasher senses the door is unlatched, it won’t start. It could be that you just didn’t firmly shut it, or the door latch is broken, and therefore can’t fully engage the door.
- Faulty control board – If it’s none of the above issues, your dishwasher is not starting because the control board is no longer responsive.
Fix
Check if the washer is getting any water. If not, ensure the water supply is turned on and straighten out the supply tube to clear any pinches or kinks. Then check the water inlet valve as it could be clogged or worn out, and if so, replace it.
If the issue is not failed water supply, reset the dishwasher to fix any software glitches. Here’s how to perform the Bosch Silence Plus 44 DBA Reset:
Option 1 – Soft Reset
The soft reset involves pressing the start switch and holding it down for about 3-5 seconds. If the dishwasher doesn’t start after that, try the hard reset.
Option 2 – Hard Reset
This requires you to unplug the Bosch dishwasher for at least 5 seconds, then plug it back in and power it on.
What if it’s not a power glitch?
Then check if Control Lock is on and hold it down briefly until the light goes off. If Delay Start is active, cancel it. And if the door is open, try to secure it; if it doesn’t latch firmly, inspect the door latch for breakage signs and replace it.
Lastly, if none of the fixes work, consider replacing the control board, as it could be defective. You cannot repair the control board. Overall, you may need an expert’s help to diagnose it.
2. Bosch Silence Plus 44 DBA Won’t Clean (Dirty Dishes)
While a dishwasher’s job is to clean the dishes, sometimes they come out dirty – even though they are not as messy as they were. In the case of a Bosch Silence Plus 44 DBA, the dishwasher won’t clean due to these issues:
- Filthy interior – If the dishwasher is dirty inside, especially its filter, the dishes will come out dirty. In most cases, it’s an issue of not cleaning the dishwasher properly over a long period.
- Dish overload – If the dishes are closely stacked together, they can obstruct the spray arms. Once that’s the case, the dishes won’t come out clean.
- Wrong cycle – The dishwasher will also fail to clean if the setting is incorrect. Consult your manual to pick a setting that matches the dishes.
Fix
Clean the dishwasher thoroughly with soap and water and remove food residues from the filter. Meanwhile, arrange the dishes properly and don’t overload the dishwasher. And lastly, use your Bosch Silence Plus 44 DBA User Manual to pick the right setting.
3. Bosch Silence Plus 44 DBA Not Drying
Sometimes the dishes may come out wet, which means the dishwasher is not drying properly. If so, the issue could be any of these:
- Non-drying setting – Your dishwasher won’t dry the dishes if you don’t use a drying setting. In such a case, the dishes will come out the way they are after cleaning – wet.
- Disrupted cycle – Ordinarily, you should wait 30 minutes after the dishwasher ends its wash cycle before you can take out the dishes. If you do it sooner or do not wait for the process to end, the dishes will come out wet.
- Insufficient Rinse Aid – Rinse Aid is necessary not only in preventing streaks and spots on the dishes but also in enhancing drying. If its level is lower, the dishes will come out wet.
- Poor dish loading – If you don’t load the dishes properly into the dishwasher, they may trap water between them and come out wet.
- Wrong cleaning product – The dishes may also come out wet if you use a cleaning product different from what the manufacturer recommends.
Fix
Choose a drying setting such as Extra Dry or Enhanced Dry if that’s not the case, and don’t disrupt the cycle. Give the dishwasher an extra 30 minutes after the cycle ends before you can open the door.
Meanwhile, check the Rinse Aid level, refill it if it’s low, and ensure you properly load the dishes. Additionally, only use the cleaning product that the manufacturer recommends.
4. Bosch Silence Plus 44 DBA Not Draining
Your Bosch Silence Plus 44 DBA will only clean the dishes properly if there’s no issue with the drainage. Some problems, however, may interfere with the drainage, and they include the following:
- A clogged filter, drain pump, air gap, or garbage disposal – If the drain filter, drain pump, air gap, or garbage disposal clogs up by food or debris, it’ll interfere with water drainage.
- Blocked drain hose – If the dishwasher’s drain hose is pinched or kicked, the water won’t drain. And if it does drain, the drainage will be slow.
Fix
Clean the drain filter, drain pump, air gap, or garbage disposal if any of them is clogged. While at it, straighten out the drain hose to eliminate any pinching or kinking.
5. Bosch Silence Plus 44 DBA Stops Mid-Cycle
Your Silence Plus 44 DBA shouldn’t stop mid-cycle. It should be able to complete a washing cycle. However, due to the issues below, the washer aborts its wash cycle prematurely:
- Improperly latched door – If the dishwasher door is not well locked, the dishwasher may stop mid-cycle and fail to continue. So, you must inspect the door to see if something obstructs it.
- Power disruption – If your dishwasher suffers a power disruption such as an outage, tripped breaker, or loose plugging, it won’t complete the wash cycle.
- Water disruption – If the water supply suddenly fails, the dishwasher will stop running and may abort the cycle midway through.
Fix
Properly latch the dishwasher door, and if you have a broken door latch, replace it. Then check the power supply using the earlier-shared tips to ensure your dishwasher turns on and also ensure you turn on its water supply and remove any pinches/kinks.
6. Bosch Silence Plus 44 DBA Buttons Not Working
The buttons should be responsive when you operate your Bosch Silence Plus 44 DBA. However, due to the following issues, that doesn’t happen:
- Lack of power
- Control Lock
- An obstructed or defective button
- Failed control board
Fix
You need first to check if your dishwasher has power. If it doesn’t, use the earlier shared troubleshooting tips to fix the power issue. If the Control Lock is active, disable it.
Then check if the buttons are stuck or broken. Try to free them in the former case and replace the buttons in the latter case. However, if you still can’t find the fault, replace the control board.
7. Bosch Silence Plus 44 DBA Display Not Working
Lastly, consider the issues below if the display of your Bosch Silence 44 DBA won’t show anything:
- Lack of power
- Active Control Lock
- Unlatched door
- A dead main control board
Fix
Like non-responsive buttons, ensure your dishwasher has power and disable Control Lock if it’s active. Then firmly latch the door, and replace the main control board if the fixes don’t work.
Bosch Silence Plus 44 DBA How to Start
Consider these steps if you want to start a Bosch Silence Plus 44 DBA dishwasher:
- Load dishes into the dishwasher
- Add detergent and power the dishwasher on
- Choose the wash setting/cycle/mode
- Press start to initiate its running
Bosch Silence Plus 44 DBA Parts
You can get Bosch Silence Plus 44 DBA replacement parts on Amazon, partselect.com, repairclinic.com, reliableparts.com, and many other stores dealing with home appliance parts. You can even inquire from the manufacturer, who also stocks these dishwasher replacements.
People Also Ask
1. But Why Is My Bosch Silence Plus 44 DBA Beeping?
Usually, your Bosch Silence Plus 44 DBA beeps when the cycle ends or when the cycle is interrupted by an outage or opening the door while the dishwasher is running.
But still, the dishwasher may beep if you fail to latch the door properly or due to a wrong setting, water leakage, poor drainage, or a stuck key.
2. How Do You Reset Bosch Silence Plus 44 DBA Dishwasher?
You can reset a Bosch Silence Plus 44 DBA by unplugging it for at least 5 seconds (hard reset) or holding down the start button for 3-5 seconds or until it beeps (soft reset)
3. Why Does My Bosch Silence Plus 44 DBA Stop Mid-Cycle?
Your Bosch Silence Plus 44 DBA will stop mid-cycle for different reasons. Among them are power or water disruption and an incompletely latched door. So, you must ensure your dishwasher has power and water and that the door is firmly locked.
Concluding Thought:
Above is a Bosch silence plus 44 DBA troubleshooting guide for consideration when your Silence Plus 44 DBA dishwasher malfunctions. That includes when it won’t start, clean the dishes, dry them, drain, or complete a cycle, and when its buttons or display won’t work.
So, the next time you face those seven issues, try to troubleshoot them and not call an expert before you try. But once you establish that the issue is beyond your DIY expertise, you can involve a dishwasher expert.
Also Read: