Frigidaire Washer Not Spinning Clothes Dry (9 Issues Fixed!)

Though you expect the clothes to come from your Frigidaire washing machine wet, you don’t expect them to be dripping wet. Once that’s the case, something has to be wrong, and I’ll share with you the possible explanations for a Frigidaire washer not spinning clothes dry.

A Frigidaire washer won’t spin-dry clothes due to inadequate power, a wrong wash cycle or spin setting, an unleveled washer, excess or unbalanced load, excessive Sudsing, an incompletely shut door, or a damaged drive belt.

One of those nine issues is stopping your washer from completely spinning, and it’s the reason the clothes are coming out of the laundry machine soaking wet. But unlike most washing machine issues, the nine are easily fixable, and it’s all DIY.

This article will enable you to identify which of the nine issues affects your washer, and I’ll recommend its fix. So, let’s dive in!

Frigidaire washer not spinning clothes dry

In a hurry? Below is a quick troubleshooting guide to fixing your Frigidaire washer when it won’t spin dry clothes.

Frigidaire Washer Not Spinning Clothes Dry – Quick Troubleshooting Guide

Likely CauseQuick Fix
1.Inadequate PowerAvoid plugging into the extension cord and use the wall socket.
2.Wrong Wash CycleMatch the laundry with the correct wash cycle.
3.Wrong Spin SpeedRaise the spin speed.
4.Unleveled WasherTighten the washer’s feet and ensure the washer sits on an even surface.
5.Excess or Unbalanced LoadDon’t overload the washing machine and evenly distribute its load.
6.Failed DrainageClean a clogged drain filter, unblock the drain hose, position it correctly, and replace a defective drain pump.
7.Excessive SudsingDon’t overuse the detergent, and only use the recommended option.
8.Incompletely Shut DoorShut the door 100%. Replace a broken door latch or door switch.
9.Damaged Drive BeltReplace a worn-out or frail drive belt.

9 Reasons Your Frigidaire Washer Won’t Spin Clothes Dry

Below are nine possible explanations for a Frigidaire washer not spinning your clothes dry:

1. Inadequate Power

If your Frigidaire washer doesn’t get enough power or has a disruption in its power supply, it won’t complete a spin cycle. So, the chances are that the clothes will come out soaking wet.

In most cases, this happens when using an extension cord, which doesn’t relay power to the washer 100%. Ideally, you shouldn’t plug into the extension cord but only the wall socket to avoid such an issue.

Fix

Consider plugging your washer into the wall socket if you are using an extension cord.

2. Wrong Wash Cycle

Your Frigidaire washing machine won’t wholly spin unless you pick the correct wash cycle. For example, if you use a Delicate, Hand Wash, or Fast Wash cycle on a bulky load, the chances are that clothes won’t spin properly and will most likely come out soaking wet.

Fix

Ensure you only use the correct wash cycle depending on the nature of the clothes you are washing. If you aren’t sure, check your appliance’s manual.

3. Wrong Spin Speed

Like using the correct wash cycle, you should select the right spin setting. If your Frigidaire washer doesn’t spin properly, perhaps it’s too slow or not spinning, the clothes will come out soaking wet.

Thus, checking the spin setting you are using is imperative to ensure that the drum spins. You can even adjust the spin setting to ensure the washer is spinning.

Fix

Consult your washer manual again to match the clothes with the correct spin setting. Ensure the drum spins if that hasn’t been the case. 

Frigidaire top load washer not spinning clothes dry

4. Unleveled Washer

Your Frigidaire washer needs to sit still as it runs to avoid throwing the clothes out of balance. If the washer is unsteady or unleveled, the laundry will go out of balance, forming heaps, and once that happens, the chances are that the clothes won’t spin dry.

Fix

Ensure your Frigidaire washing machine is well-balanced and steady. Position it on a solid and even surface and adjust its feet accordingly to avoid shakiness. Remember to redistribute the clothes uniformly before restarting the washer, as they might be off balance.

5. Excess or Unbalanced Load

The laundry should not be excessive as that will leave no room for it to turn. And if the clothes don’t turn, they’ll be soaking wet.

A laundry overload, however, isn’t the only concern. The laundry should also be even. It shouldn’t be out of balance or forming heaps, as that will also cause it not to spin dry.

Fix

Reduce the laundry you are washing if it’s more than ¾ full. It shouldn’t exceed that. Another thing to do is evenly distribute the clothes in the washer to avoid unevenness or heaps.

6. Failed Drainage

If your Frigidaire washer doesn’t drain properly, the clothes will soak up the water in the tub, and as a result, they’ll come out soaking wet. Overall, the drainage could fail due to any of these issues:

  • Clogged drain filter
  • Kinked or clogged drain hose
  • Filthy or defective drain pump
  • Wrong drain pipe placement height (which should be 39-96 inches off the ground)

Fix

Inspect the drain filter, pipe, and pump for clogging and clean them if that’s the case. Unkink the drain hose if it’s bent, and ensure you place it 39-96 inches off the ground. Meanwhile, consider replacing the drain pump if it appears broken.

7. Excessive Sudsing

Too much suds aren’t good for your washing machine. Not only does it slow down the drainage, but it also interferes with the washer’s spinning performance. So, you can expect the washer not to drain properly and have issues spinning when there are many suds, and in the end, the clothes will come out soaking wet.

This could be a case of using too much detergent – more than what Frigidaire recommends for your washer. But still, you could be using the wrong detergent – perhaps a non-HE option, which will likely over-suds.

Fix

First, ensure you only use the laundry detergent Frigidaire recommends for your washer. Also, ensure you only use the correct amount per wash. You can check your manual.

Frigidaire front load washer not spinning clothes dry

8. Incompletely Shut Door

Like most washers, Frigidaire washers won’t complete a cycle once they notice a partially latched door. So, check if that’s the case. It could be that something is blocking the door from shutting firmly, such as debris or clothing, or it could be that the door latch or switch is damaged.

Fix

Remove any obstruction on the door to firmly latch it. If there’s none and the door won’t lock securely, check if the door latch is damaged and replace it. If that’s not the case, check with a multimeter if the door switch has continuity and replace it if it doesn’t.

9. Damaged Drive Belt

Lastly, consider that your Frigidaire washer might not be spinning the clothes dry because the drive belt is malfunctioning. The spin cycle depends on a working drive belt. The belt won’t turn the drum entirely if worn out or frail. So, the washer may skip a process. In the end, the clothes will come out dripping wet.

Fix

Inspect the drive belt for wear and frailty and replace it if that’s the case.

Frigidaire Front Load Washer Not Spinning Clothes Dry

Your Frigidaire front load washer isn’t spin-drying clothes because of one of these issues:

  • You are using an incorrect wash cycle or spin setting
  • The door won’t latch completely, perhaps due to a defective door latch
  • The washer is out of balance
  • Excessive or out-of-balance laundry load
  • Poor drainage – perhaps due to a clogged drain hose or drain filter or a malfunctioning drain pipe
  • Using too much detergent

Frigidaire Affinity Washer Not Spinning Clothes Dry

There are several issues when a Frigidaire Affinity washing machine doesn’t spin clothes dry. First, check if you are using the extension cord, and if so, plug it into the wall socket instead.

The other issue is poor laundry distribution or excessive load. That shouldn’t be the case. Also, check if the washer is out of level and ensure you steady and level it.

Other issues worth checking include poor drainage, a partially latched washer door, too many suds, or a damaged drive belt.

Frigidaire Top Load Washer Not Spinning Clothes Dry

Your Frigidaire top load washer won’t spin clothes dry due to one of these issues:

  • Inadequate power supply – perhaps due to using an extension cord
  • An improperly shut lid
  • Laundry imbalance or overload
  • Washer imbalance
  • Too much suds – primarily due to using too much detergent
  • A damaged drive belt
  • Poor drainage – perhaps due to clogging of the drain filter, tube, or drain pump
Frigidaire affinity washer not spinning clothes dry

People Also Ask

1. Why Is My Washing Machine Not Spinning Clothes Dry?

Your washing machine isn’t spinning clothes dry because the power is inadequate (due to using the extension cord), the drainage is poor, the laundry load is uneven or excessive, the washer is out of balance, or the wash cycle or setting is all wrong.

But still, it could be due to a partially open door, a defective drive belt, poor drainage, or excess suds.

2. Why Are My Clothes Still Wet After Spin Cycle?

Your clothes are still wet after the washer’s spin cycle because the spin cycle or speed is all wrong, there’s too much detergent, the load is out of balance or excessive, or the washer is unsteady. It could also be that the water doesn’t drain or the drive belt is defective.

3. How Do You Dry Clothes with The Spin Cycle?

The easiest way to dry clothes with the washing machine’s spin cycle is to step up the RPM. Increase the washing machine’s spin speed, which equals a higher water removal rate, and the clothes will come out less wet.

Concluding Thought On a Frigidaire Washer Not Spinning Clothes Dry:

Above are the issues to consider when your Frigidaire washer won’t spin your clothes dry. As shared, all the problems are fixable, and you don’t have to pay a washing machine expert.

Start by ensuring you aren’t plugging into the extension cord but the wall outlet, and use the correct wash cycle and spin setting. Then, ensure the washer is well leveled and correctly load it.

While at it, avoid overusing the detergent, ensure the water drains, completely latch the door and replace the drive belt if it’s defective. That’s how you get your washer back spin-drying.