After a component change or clearing an error code, a washer reset is advisable. If you own a Maytag Bravos MCT washer, the question you are asking is, how do I perform a Maytag Bravos MCT Washer reset?
You can reset your Maytag Bravos MCT washer through the recalibration technique where you: turn the selector knob one click counterclockwise, three clicks clockwise, one click clockwise, and then one-click counterclockwise.
Mark you, the recalibration technique is only one of five techniques I’ll share for resetting the Maytag Bravos MCT washer. Thus, knowing two or three is advisable, and this guide will help you.
But before we review the five techniques, let’s consider why you should perform the reset in the first place.
Why Opt for the Maytag Bravos MCT Washer Reset?
Below are the ten common reasons (or situations when) you should consider a washer reset.
1. After A Component Change
Most washer technicians advise resetting your washer after a component change. That’s particularly true when dealing with a vital component directly affecting the washer’s operations.
For example, after changing the control board (the brain and heart of your washer), you need to perform a reset.
2. After an Error Code Clearance
When your washing machine behaves weirdly or malfunctions, it’s usually due to an error code. An error code may even stop your washer from starting.
When this happens, your washer will display the code; sometimes, you must troubleshoot it using your manual. After clearing any error code, resetting your washer to avoid recurring the same error is a good idea.
3. When Your Maytag Washer Won’t Start
Have you ever faced a scenario when there is power, but your washing machine won’t start a cycle? Well, that happened to me.
I realized that when the power cable is always plugged in for quite a long time (some have never unplugged it since buying it), your washer may abruptly fail to start a cycle, and thus you should consider resetting your washer.
4. After A Power Interruption
Sometimes the power goes out when the washer is at mid-cycle. Other times there may be a power surge. So, it’s always advisable that you reset your washer before restarting your washer.
5. After Balancing the Load
Once you start a wash cycle and notice that your washer produces a banging or thumping sound, you likely have a load imbalance.
You can remedy the situation by stopping your washer and redistributing your laundry. Before restarting the cycle, you should first give your washer a reset.
6. When The Detergent Dispenser Malfunctions
The detergent dispenser at one point may malfunction. When this happens, you should thoroughly clean it to unclog it since most detergent dispenser faults are caused by clogging.
However, cleaning it may not help if it’s defective, and the only thing to do is replace it. Replacing the detergent dispenser should go hand in hand with resetting your washer.
7. When Your Washer Won’t Proceed to The Next Cycle
It’s annoying when your washer cannot go to the next cycle. When you face this problem, the culprit to check is the drive belt.
The drive belt may wear and tear with time, preventing your washer from going to the next cycle. Start by visually checking if the belt is overly stretched or damaged. If it is, replace it, followed by a washer reset.
Other Reasons to Reset the Maytag Bravos MCT Washer
8. When Your Maytag MCT Washer Produces Weird Noise
The last thing you expect from your washer is annoying weird sounds. But once you hear these sounds, it’s without a doubt that your washer has something going wrong.
Objects like pins, coins, or keys are trapped in the washer, the motor struggles to spin, or the drive belt is stretched or damaged. Whatever the case, you should get to the root cause of the noise, fix it and reset your washer.
9. When The Washer Doesn’t Agitate
Spinning and agitation go hand in hand. At times this may not be the case. It would be best not to look beyond the drive block when your washer only spins without agitating.
When it’s defective, the shaft may still work, but the agitator will likely move slightly or not. So, inspect your washer drive block, and if stripped, worn out, or damaged, replace it and reset your washer.
10. When The Washing Machine Vibrates Non-Stop
It’s disturbing to have a washer that continually vibrates without a break. When this happens, the likely cause is a faulty drive belt, a defective lid switch, or any other faulty component.
When this happens for a long time, the chances of your washer not starting are much higher. Diagnosing the cause, fixing it, and resetting the washer is advisable.
How to Perform a Maytag Bravos MCT Washer Reset?
After discussing the Maytag Bravos MCT washer problems that call for a reset. Let us now discuss the five primary ways you can reset your washer. They include:
1. The Calibration Method
The word recalibration is often used interchangeably with resetting or restarting. If your washer is malfunctioning or acting weirdly, you can save yourself technician costs by just recalibrating your washer.
This process is widespread and goes well with most Maytag Bravos MCT models, and below are the steps to follow:
- Ensure you close your washer lid, empty the washer (no water or clothes) should be in the dryer, and put your washer on standby mode (all indicators off but plugged in)
- Turn the washer selector knob left (counterclockwise) once, wait for ½ second, and turn it right (clockwise) three times with an ½ interval between (you can count 1, 2, 3 as you turn the selector knob)
- Now, turn the cycle selector knob left (counterclockwise) one more time and wait for half a second before turning it to the right (clockwise) one last turn
- Once done, the light-only indicator should display
- Lastly, press the start button for the washer to complete the recalibration process.
2. Cancel/Power Method
Another simple alternative to reset your washer is the cancel/power method. In this technique, you only need to plug your washer into the power socket and press the cancel/power button.
You should then pick a cycle and press pause/start, and your washer should reset. You can test its operation by running some laundry.
3. The 12 O’clock Method
Though this reset method doesn’t go with all Maytag Bravos MCT washers, it may work for some, including your washer.
Below are the easy steps to follow:
- Turn your washer cycle selector knob counterclockwise until it clicks to the 12 o’clock position
- Then turn the selector knob clockwise four times.
- By now, the rinse indicator should display, and once it shows, restart your washer by pressing the start button, and your washer should reset
4. Power Disconnect Technique
If there is one quick reset technique, it has to be the unplug-then-re-plug or power disconnect method. However, resetting your washer after clearing an error code using this technique is not the most effective.
But if you’re resetting the washer after fixing other issues or component changes, it may work for you. Below are the easy steps to follow:
- Unplug your washer power cable from the wall socket and wait 10 – 15 minutes for you to plug it back in.
- If your washer still doesn’t reset, repeat the process, but this time, wait 30 minutes before re-plugging, and your washer should reset.
5. Lifting and Closing the Lid
If you own a top-load Maytag washer, this method is most effective for resetting your washer. Unfortunately, it does not apply to front loaders.
Below are the easy steps to follow:
- Disconnect the washer from power and wait for a minute and connect it back
- Lift the lid and close it six times at an interval of 12 seconds
Kindly note that you should start the process within 30 seconds when you connect back the power cable and turn on the power.
Meanwhile, ensure the lid closes all six times correctly for a successful reset. Failure to close the lid even one time in six closes, your washer won’t reset. You can confirm if the washer reset by running a load.
How to Put Your Maytag Bravos MCT Washer in Service Mode?
We must recognize that, at times, we may try within any means possible to reset the Maytag Bravos MCT washer to no avail. When that happens, you should put your washer in service mode to diagnose its fault.
Below are the steps to follow:
- Put your washer on standby mode (you can enter standby mode by plugging in the washer to the power, then press the start/pause button and hold for around 3 seconds (all LED lights should go off)
- Turn the selector knob three times clockwise within an interval of ½ between clicks
- Turn the selector knob one time counterclockwise and wait for ½ second before turning it clockwise again one last time. (Note that all these steps should complete within 3 – 6 seconds)
- After that, the LED light will start flashing On-Off at an interval of ½ second, and your dryer will enter service mode
People Also Ask
1. But, How Do I Reset My Maytag MCT Washer?
You can reset your Maytag Bravos MCT washer by turning the cycle selector knob one time counterclockwise, three times clockwise, another turn counterclockwise, and a turn clockwise.
If the washer doesn’t reset after that, you can consider unplugging it from power and waiting 15 – 30 minutes before re-plugging it.
2. Do Maytag Bravos MCT Washers Have a Reset Button?
Unfortunately, Maytag Bravos MCT washers do not come with a reset button. This means that you have to reset the washer manually.
However, most reset processes are straightforward. For example, you can unplug the washer from power to break the circuit for 15 – 30 minutes and plug it back in.
3. Why Won’t My Maytag Bravos MCT Washer Start?
There are many reasons to explain a non-starting Maytag Bravos MCT washer. For example, your Maytag washer won’t start due to Control Lock, an open lid, a power failure, or an error code.
However, resetting it to fix most of these issues is recommended. You can reset it by pressing the start/power button for 5 minutes, followed by pause/play for another 5 seconds, and your washer should go to its normal operations.
Concluding Thoughts on the Maytag Bravos MCT Washer Reset:
As seen, resetting your washer after a component change, clearing an error code, or a power interruption is advisable.
You can hold that call to the expert and save yourself the cost by resetting your washer by following any process above. And since resetting your washer could bring it back to normal operations, it’s worth every try!