Imagine you’ve just waited about an hour for your Maytag washer to complete its wash cycle. To your surprise, the clothes are coming out wet, and you can’t explain the reason for your Maytag washer not spinning clothes dry.
Your Maytag washer isn’t spinning your clothes dry due to a wrong wash cycle or spin speed, a recent power outage, an imbalance, excess suds, a loading or drainage problem, a faulty belt, or a lid switch malfunction.
So, consider going through all these nine reasons to discover why the clothes are still soaking wet after the wash cycle. Remember, if you find that reason, it’s easy to troubleshoot the washing machine DIY, and I’ll help you.
We’ll discuss the likely reasons behind each of the nine issues and their most recommended fix. After that, we’ll address specific Maytag washer models such as the Centennial, Atlantis, Neptune, Performa, and Maxima to help you take a more direct approach, depending on your model.
Let’s jump in!
In a rush? See below a quick guide to fixing a Maytag washer that won’t spin dry clothes:
Maytag Washer Not Spinning Clothes Dry – Quick Troubleshooting Guide
| – | Likely Cause | Recommended Fix |
| 1. | Wrong Wash Cycle | Match the laundry load with the wash cycle. |
| 2. | Wrong Spin Speed | Choose a high-spin setting. |
| 3. | Recent Power Failure | Reset the washer |
| 4. | Washer Imbalance | Position the washer on an even surface, steady its feet, and uniformly distribute its load. |
| 5. | Excess Suds | Use the recommended detergent, and don’t put too much of it. |
| 6. | Loading Problem | Don’t overload the washer, avoid excessively bulky items, and evenly distribute the load. |
| 7. | Drainage Problem | Position the drain hose correctly, unkink it if it’s kinked, and unclog it if it’s clogged. Clean the drain pump if it is clogged and replace it if it’s faulty. |
| 8. | Faulty Belt | Replace a stretched, loose, or worn-out washer belt. |
| 9. | Lid Switch Malfunction | Replace the lid switch if it doesn’t pass the multimeter continuity check. |
Why Is My Maytag Washer Not Spinning Clothes Dry?
Are your Maytag washer clothes still wet after the spin cycle? Then it’s likely due to one of these issues:
1. Wrong Wash Cycle
Maytag washers have different wash cycles, and all of these cycles have varying cycle times. So, it’s essential that you match the load with the wash cycle.
For example, you cannot use a hand wash, rapid, delicate, quick wash, or normal wash cycle on a bulky item like a blanket or bedding supplies. A bulky item will need a bulky or heavy-duty setting, while beddings need the bedding cycle.
If you use any other cycle, the load won’t spin dry and will thus likely come out soaking wet.
Fix
Select the correct Maytag wash cycle and cycle time to match your load. Do that before you run the washer.
2. Wrong Spin Speed
Another thing that could stop your washing machine from spin-drying your clothes is the spin speed. You cannot expect it to spin-dry clothes if the washer isn’t spinning at all or if it’s only slightly spinning.
It could be that you’ve opted for the no-spin, low-spin, or extra-low-spin setting, and if so, the clothes will likely come out wet.
Fix
Check your washing machine’s spin speed to ensure it is correctly spinning. Ensure you opt for a high-spin speed instead of a low-spin, no-spin, or extra-low-spin setting.
3. Recent Power Failure
Sometimes, your washer might not be spin-drying clothes because of a power failure or an outage while the cycle runs. In such an event, the interruption could have interfered with the wash cycle, which is why the clothes are still wet.
Fix
Consider resetting your Maytag washing machine in the event of a power failure. That requires you to unplug it for at least 5 minutes, restore its power, and restart the cycle.
4. Washer Imbalance
If the washer is out of balance, so will the load. If so, the load won’t spin as it should. The clothes will likely come out soaking wet as a result.
Remember, it could be that the washer is out of balance because of placing it on an uneven surface. But still, it could be that its feet are unstable or loose and will not steady the washing machine on the ground.
Fix
Check if your washer is unstable and ensure you position it on a more uniform surface. If the feet are loose or unlevelled, adjust and tighten them accordingly to ensure they are steady. Before running the washing machine, redistribute the laundry load evenly, as it’s likely to be uneven.
5. Excess Suds (Maytag Front Load Washer Not Spinning Clothes Dry)
Just because you must use the detergent doesn’t mean you should use it excessively. If you do, it’s likely to form excessive suds, interfering with the drainage and the spin cycle.
Excess suds could also result from using the wrong detergent, such as a non-HE option. Thus, it’s advisable to stick to the detergent that the washer manufacturer recommends.
Overall, this issue will likely happen more on a Maytag front loader.
Fix
First, ensure you are using the correct laundry detergent. If that’s the case, then don’t put too much of it.
6. Loading Problem
Unless the laundry is loaded correctly, it won’t spin dry. Yes, your Maytag washer might drain, but it won’t spin, and the clothes will come out soaking wet.
Here are the things that could go wrong:
- Laundry overload (exceeding the drum’s ¾ holding capacity)
- Bulky item (a vast and heavy item such as a blanket)
- Laundry imbalance (mainly relates to an uneven washer or poor distribution)
Fix
Reduce the excess articles to keep your washer’s drum capacity ¾ and remove bulky items. While at it, evenly distribute the load before re-running the washer.
7. Drainage Problem
You cannot compromise on the drainage. If the washer doesn’t drain, it remains in the tub, and if that’s the case, it’ll soak the clothes, and they’ll come out soaking wet at the end of the wash cycle.
Overall, here are the issues that could interfere with your Maytag washer’s drainage:
- Wrongly positioned drain hose – If the drain hose is more than 96 inches off the ground, it won’t allow water to drain out, and the washer may also have difficulty draining if it’s lower than 39 inches.
- Obstructed drain hose – If the drain hose is clogged or bent/kinked, it won’t allow water to drain, impacting the wash cycle.
- Defective pump – The drain pump could become defective either from excessive clogging or from breaking down, and if so, it won’t pump out water from the tub.
Fix
Position the drain hose correctly. Keep your washer’s drain pipe height at 39-96 inches, and stretch the drain hose to clear any kinks. Clean it and do the same for a clogged drain pump. Replace the drain pump, however, if it’s broken.
8. Faulty Belt
Your Maytag washer will have difficulty spinning correctly if its belt is faulty. It could be that the belt is stretched, loose, or worn out. Whatever the case, the belt won’t turn the drum, and if the drum won’t, the clothes will come out soaking wet.
Fix
Inspect the washer belt for signs of looseness, stretch, or damage, and replace it if so.
9. Lid Switch Malfunction (Maytag Top Load Washer Not Spinning Clothes Dry)
Lastly, if you have a Maytag top loader that won’t spin clothes dry, there is a chance that it’s because the lid won’t shut properly. That often happens due to a defective lid switch, which you can check with a multimeter.
Fix
Test the lid switch with a multimeter continuity checker. Replace the switch if it fails to show continuity.
Other Issues
Maytag Neptune Washer Not Spinning Clothes Dry
Your Maytag Neptune washer might not be spin-drying clothes because of a slow or no-spin setting, an incorrect wash cycle, an uneven or bulky load, or a load imbalance. If not, it could be a recent power failure, bad drainage, or too many suds (often relating to detergent overuse or the wrong choice of detergent)
Maytag Centennial Washer Not Spinning Clothes Dry
If your Maytag Centennial washer doesn’t spin clothes dry, it could be because the washer or the clothes are out of balance and will, therefore, not turn correctly, or perhaps the washer is overloaded or running on a wrong spin speed or wash cycle. But if not, it could be a recent power failure, too many suds, a defective washer belt, or a broken lid switch.
Maytag Performa Washer Not Spinning Clothes Dry
Consider that your Maytag Performa washer might not be spinning the clothes dry because of an incorrect wash cycle or spin speed, an overload, or a load imbalance. Other issues worth checking include a recent power failure, a faulty lid switch, drain pump, or belt, or even using the wrong detergent or too much of it.
Maytag Atlantis Washer Not Spinning Clothes Dry
A Maytag Atlantis washer doesn’t fail to spin dry clothes unless something is wrong. The issue could be with the load itself, as it could be out of balance, excessive, or bulky. It could also be that you are using too much detergent, the spinning is too slow, or the wash cycle is the wrong fit for the load.
If that’s not it, it could be a recent power outage (which needs you to reset the washer), a drainage problem, or a malfunctioning component such as the lid switch, drain pump, or washer belt.
Maytag Maxima Washer Not Spinning Clothes Dry
Lastly, consider the issues below if your Maytag Maxima washer won’t spin clothes dry:
- The laundry could be excessive, out of balance, or just too bulky
- The washer’s spin speed or wash cycle might be the wrong selection
- Possible poor drainage due to a pump failure, drain hose blockage, or poor drain hose placement
- Too many suds – primarily due to detergent overuse or the wrong detergent type
- A failed lid switch or washer belt
Concluding Thought:
Above are the nine most essential checks when dealing with a Maytag washer not spinning clothes dry. First, check if the wash cycle and spin settings are correct and reset the washer in case of a recent power failure. Then, ensure you balance the washer, avoid detergent overuse, and load the washer correctly.
Also, fix any drainage issues and replace a defective washer belt or lid switch. Once you explore all these troubleshooting tips and are unsuccessful, you can turn to Maytag support or your local washer expert for help.
Also Read: