A Whirlpool Cabrio washer and an airplane are two different things. Yet, sometimes a Whirlpool Cabrio washer sounds like jet engine, and you have to fix it, as the issue often points to a serious problem with your laundry machine.
A Whirlpool Cabrio washer mostly makes the jet engine sound when the ball bearings that support the drum go bad. But still, it could be due to an overload, wrong laundry, high-spin, excess suds, obstructive object, clogged vent, worn-out gasket, drain pump fault, or a defective belt or drive pulley.
So, while the most likely explanation is bad bearings, there are other ten that you can’t overlook. Some are worth checking before looking at the bearings and are generally easy fixes.
Remember, it could be that the noise indicates your washing machine is failing, and you wouldn’t want it to fail completely. Thus, it’s worth troubleshooting as soon as you hear the jet engine noise, and this guide will help you do that.
So, let’s dive in!
In a hurry? Below is a quick guide to fixing a Whirlpool Cabrio washer that won’t stop making the jet engine sounds:
Whirlpool Cabrio Washer Sounds Like Jet Engine – Quick Troubleshooting Guide
| – | Likely Issue | Quick Fix |
| 1. | Bad Ball Bearings | Replace rusty or worn-out ball bearings. |
| 2. | Washer Overload | Take out the excess laundry. |
| 3. | Wrong Laundry Type | Don’t wash electric blankets, rugs, door mats, and other bulky stuff. |
| 4. | High-Speed Spin | Reduce the spin speed to 600-1800 rpm. |
| 5. | Excess Suds | Don’t put too much detergent, and only use what Whirlpool recommends. |
| 6. | Obstructive Metal Objects | Remove loose screws, broken zippers, pins, and other metallic objects from the drum. |
| 7. | Clogged Vent | Clean the vent |
| 8. | Worn-Out Gasket | Replace the gasket |
| 9. | Drain Pump Malfunction | Clean the drain pump if obstructed and replace it if it’s damaged. |
| 10. | Defective Washer Belt | Replace a damaged, frail, or loose drive belt. |
| 11. | Defective Drive Pulley | Replace a loose or damaged drive pulley. |
Why Your Whirlpool Cabrio Washer Sounds Like Jet Engine
Below are the likely explanations for a Whirlpool Cabrio washer that sounds like an airplane about to take off:
1. Bad Ball Bearings (The Commonest Reason a Whirlpool Cabrio Makes the Jet Engine Sound)
As I mentioned, most Whirlpool Cabrio washing machines make the jet engine sound because of bad ball bearings. The ball bearings are small metal rings that support the washer drum as it turns, and you can find them at the back of the appliance.
Over time, these metal rings wear out, and at times, they rust from water contact. In either case, the ball bearings will become noisy and often sound like an airplane about to take off.
Fix
Nowadays, you don’t have to replace the entire outer tub just because you want to replace the ball bearings. After all, it’s expensive to do so.
Whirlpool has made it easy to only replace the ball bearings, which you should do if they are worn out. But if they are rusty, consider greasing them first to see if the jet engine sound will stop.
Other Reasons a Whirlpool Cabrio Washer May Sound Like Jet Engine
If the cause for the engine noise is not the ball bearings, then it could be one of the issues below:
2. Washer Overload
An overloaded washer will either fail to spin or may make some noise if it chooses to run. In the latter case, a Whirlpool Cabrio washer may make different annoying sounds, ranging from a grinding noise to a jet engine sound.
Ordinarily, the drum shouldn’t be more than ¾ full. If it is, that counts as an overload and could be why your washer won’t run silently.
Fix
If the drum is over ¾ full, reduce the excess laundry before restarting the washer.
3. Wrong Laundry Type
Not everything dirty should go into the washing machine. For example, you shouldn’t load electric blankets, rugs, door mats, or anything similar into the Whirlpool Cabrio washer.
If you do, you’ll overwork the washer, which may make it noisy. So, that could be the reason the washer is making a jet engine sound.
Fix
Avoid loading electric blankets, rugs, door mats, or bulky items into the washer. Only wash regular laundry items.
4. High-Speed Spin Setting
A proper spinning washing machine runs at a spin speed of 600-1800 rpm. If it’s higher than 1800 rpm, the washer may become too noisy, sometimes making the jet engine sound. And if it’s less than 400 rpm, your Whirlpool Cabrio washer may fail to spin the clothes dry.
Fix
Adjust your washer’s spin speed to 600-1800 rpm if that’s not the case. You can check the manual for directions.
5. Excess Suds
Too much Sudsing isn’t good for your washer. Not only can it stop your Whirlpool Cabrio washer from spinning or draining, but it may also result in weird engine noise if the washer runs.
The excess suds could result from putting too much detergent or just using the wrong detergent, more so a non-HE.
Fix
Only use the detergent that the washer manufacturer recommends. While at it, only use the recommended amount. Avoid putting too much of it.
6. Obstructive Metal Objects
You must check the drum for loose metallic objects like coins, screws, broken zippers, pins, or any other. Such things obstruct the drum and force it to make some weird sound when turning. The noise could be that of the jet engine.
Fix
Remove loose metallic objects from the washer’s drum.
7. Clogged Vent
The vent is responsible for circulating air inside the washing machine and keeping it cool. It, however, blocks over time, and when it does, it struggles to do its job and may make the jet engine sound.
Fix
Inspect the washer’s vent for clogging and clean it. You can use the drain snake or vacuum cleaner.
8. Worn-Out Gasket
The gasket is the rubber seal on the outer tub whose job is to prevent possible water leakage. It, however, wears down like every other washer part, and when it does, it allows water to seep through, sometimes making the jet engine sound.
Fix
Replace the gasket if it’s worn out.
9. Drain Pump Malfunction
A properly working drain pump isn’t noisy. If it is, especially if the noise is too loud, the drain pump could be heavily clogged or damaged. So, you ought to inspect it keenly.
Fix
Clean the drain pump if it’s clogged. Replace it, however, if it appears damaged.
10. Defective Washer Belt
The drive belt should work fine for your Whirlpool Cabrio washing machine to spin correctly. If it’s, however, worn-out, frail, or loose, it may fail to turn the drum and may produce a jet engine sound as a result.
Fix
Replace a worn-out, frail, or loose drive belt.
11. Defective Drive Pulley
Lastly, consider that your Whirlpool Cabrio dryer might sound like a jet engine because the drive pulley is either loose or damaged. This component is responsible for turning the inner tub during a spin cycle. So, if it’s defective, the washer may make some weird noise during the spin cycle.
Fix
Replace the drive pulley if it’s loose or damaged.
People Also Ask
1. Why Is My Whirlpool Cabrio Washer So Loud?
Your Whirlpool Cabrio washer is so loud because something is wrong. It could be that the load is too heavy for the washer, thus overworking it, or it could be that there are too many suds due to detergent overuse.
Also, check your washer’s spin setting, as it could be spinning very fast, and remove any foreign metal objects, such as loose screws in the drum, as they could be obstructive and noisy.
If not, it could be due to a failing component such as the ball bearing, drain pump, drive belt, or drive pulley.
2. Why Does My Washer Sound Like a Jet Engine?
Your washing machine might sound like a jet engine due to any of these reasons:
- Using too much detergent
- Drain pump malfunction
- Excess laundry or washing an extra bulky item such as an electric blanket, door mat, or rug
- Obstructive metal objects such as loose screws, pins, broken sippers, or any other inside the drum
- High-spin speed setting (above 1800 rpm)
- Clogged vent, which needs cleaning
- Defective belt, drive pulley, or ball bearings, which need replacing
3. Why Does My Whirlpool Washing Machine Sounds Like a Jet Engine When Spinning?
It’s not normal for a Whirlpool washing machine to make the jet engine sound when the washer is spinning. It often points to problems such as a high-spin setting (above 1800 rpm), too much detergent, excess load, the wrong laundry, or a clogged vent.
And if that’s not it, it could be due to rusty or damaged ball bearings, which struggle to support the drum. But still, it could be due to a defective washer belt, drive pulley, or drain pump.
4. Why Does My Whirlpool Washer Makes a Whining Sound?
Sometimes, a Whirlpool washer whines due to defective ball bearings, which fail to support the drum as it spins properly. It could also be that the shock absorbers are failing to absorb the excess shock, or perhaps it’s a defective case of the drive belt or motor. If so, replace the faulty or worn-out part.
5. What to Do If Your Washer Is Making a Loud Noise?
You can do several things if your washer is making a loud noise. They include the following:
- Choose the correct spin setting for your washer (preferably 600-1800 rpm)
- Avoid overloading the washer
- Remove trapped foreign objects like broken zippers and loose screws in the drum.
- Don’t put too much detergent, and use what Whirlpool recommends
- Only load the correct items and not bulky options like door mats and rugs
- Grease the ball bearings if they are rusty and replace them if they are worn out
- Replace a defective washer pulley or drive belt
Concluding Thought On A Whirlpool Cabrio Washer Sounds Like Jet Engine:
Now you’ve 11 issues to check when your Whirlpool Cabrio washer sounds like a jet engine. While the most likely explanation is defective ball bearings, you can’t overlook several other issues. That includes a washer overload, wrong laundry type, high-spin setting, excess suds, obstructive metallic objects, or a clogged vent. Moreover, you can check for a faulty drain pump, washer belt, or drive pulley.
Also Read: